Sanke Type D or S Cleaning Jumper Cap

Home > Equipment > Kegging Parts >

Alternative Views:

Our Price: $10.99

Quantity in Stock:39

Product Code: SANKECLEANINGCAP

Qty:

Description

Lock this simple device on to the bottom of any Sanke Type D (American) or Type S (euro) keg coupler and you can clean both the coupler and your beer lines in one step. What's this black magic you ask? Whether you like to clean your lines with a pump type tank or by pumping cleaning solution with a submersible pond pump, all you have to do is:

1. Screw on the Jumper Cap.
2. Attach cleaning hose source to the GAS IN port on the coupler.
3. Put lever in the tapped (down) position.
4. Push some hose onto your faucet spout and route into a catch bucket or where your pond pump is located.
5. Start pump and open your faucet.

Again, this cleans your coupler, your lines, and your faucet all in one easy step.

Accessories

Tailpiece, 1/2" Barb, Stainless Steel

Tailpiece, 3/8" Barb, Stainless Steel

Hex Beer Nut for Shanks and Keg Couplers - BEER THREAD (5/8 BSP aka 7/8-18") NOT NPT

Cleaning Brush, 3/4" diameter

Our Price: $4.50

Add

Our Price: $2.75

Add

Our Price: $0.99

Add

Our Price: $3.85

Add

Beer Line Cleaner, BLC (32 Oz)

Our Price: $19.99

Add

Average Rating: Average Rating: 5 of 5

5 of 5 Total Reviews: 1 Click Here to Write a Review »

0 of 0 people found the following review helpful:

Sanke Type D or S Cleaning Jumper Cap	June 22, 2020
Reviewer: George Reilly from Bridgewater , NJ United States

The cap worked perfectly and I was able to clean out my beer line within minutes.

Was this review helpful to you?

	Extract Kit: Cream Ale $38.50
	DIAMMONIUM PHOSPHATE 2oz DAP nutrient $4.39
	Drip Tray, Stainless Steel, Surface Mount, 8" x 24" $79.00
	Fermentis SafBrew T-58 T58 Dry Yeast 11.5 g $3.03