Home > Equipment > Mashing >

12" Domed False Bottom w/ High Flow Elbow Connector
12" Domed False Bottom w/ High Flow Elbow Connector


 
Our Price: $39.50

Quantity in Stock:56

Product Code: FB12D
Qty:

Description
 
12" Domed and perforated stainless steel false bottom with high flow elbow barb connector.

The barbed elbow connector we use to attach the false bottom to the bulkhead drain has an inside cross sectional area that is 400% larger than all of the competitor products out there. When domed false bottoms first came onto the market, it included an 90 degree elbow barb where the barb's inside diameter was only a quarter inch (6mm). Everyone just accepted it and suffered through stuck sparges eventually giving domed false bottoms a bad reputation.

Note: This item is just the 12" domed false bottom and the elbow barbed connection in the center. For planning purposes, make sure whatever bulkhead you have will allow for a piece of 1/2" ID silicone tubing as that's the only way to connect to our high flow false bottom. We recommend converting over to our True Bulkhead Barb (truebulkbarb) to make ultimate use of this high flow false bottom. Also keep in mind that we include this false bottom in our full cooler conversion kit as well as our completed cooler mash tun product.

This item will fit 10 gallon Igloo and Rubbermaid round coolers and any other flat bottom vessel measuring at least 12.5" Inside Diameter.

Note: this false bottom is sturdy enough to support the weight of a static mash or a mash being drained via gravity. If you intend to use a pump on the output of the mash tun with this false bottom, you should fashion some kind of support for the center area to keep the false bottom from collapsing in the case of a compacted grain bed.

Average Rating: 5 of 5 Total Reviews: 10 Click Here to Write a Review »

Accessories
CDN Digital Thermometer DTQ450X
Our Price: $17.00

Add
CDN Digital Thermometer DTQ450X
Weldless Probe Compression Fitting for Coolers PCOMP3
Our Price: $16.00

Add
Weldless Probe Compression Fitting for Coolers PCOMP3
CDN Clock/Timer/Corded Digital Thermometer DTTC
Sale Price: $17.99

Add
CDN Clock/Timer/Corded Digital Thermometer DTTC
Kit Ball Valve Upgrade - 2pc to 3pc (use only if ordering kit with 2pc Valve as standard)
Our Price: $5.00

Add
Kit Ball Valve Upgrade - 2pc to 3pc (use only if ordering kit with 2pc Valve as standard)


  0 of 0 people found the following review helpful:
 
Works great for a pump setup. May 16, 2017
Reviewer: Stephen from Salem, MA United States  
I use this in a HERMS system with a pump and it worked great.. It wasn't exactly flush with the kettle bottom, but the weight of the grain bed seems to push it down flush.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Product was exactly as described. May 15, 2017
Reviewer: T Baxter from Fort Collns, CO United States  
I was looking for a very specific product that I could not find on other sites.  BH had this item.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Perfect Fit March 29, 2017
Reviewer: McNabbulous from Dearborn, MI United States  
For 15 gallon Concord pot.  Does not cover entire diameter of pot, but a majority of it does, and kept out any grains during the mash/fly-sparging process.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Exceeded Expectations March 7, 2017
Reviewer: Michael Salvatore from Humble, TX United States  
I installed this in my 10 gallon igloo cooler MLT used in a HERMs system. My old false bottom used to stick 50% of the time at flows less that 1 gpm. My last brew with this false bottom allowed me to recirculate at 2+ gpm without issue. Wish I would've found this sooner. Worth every penny.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Awesome May 21, 2016
Reviewer: Jason Floor from Scottsdale, AZ United States  
All of the camlocks from BrewHardware.com are excellent quality and I love the custom and specialty fittings they offer just for homebrewing, they really make a huge difference and are easy to clean, use, and sanitize, and flow very well. This kit includes everything you need to convert a cooler to a mash tun, and it worked great for me using the 10 gallon home depot orange coolers.

Was this review helpful to you?

View All Customer Reviews